Tag Archives: priority

RT Periodic Thread Code and Scheduler Policy and Priority

Leave a reply

in this post, I am going to share an example code creating two threads running with a periodic cycle in an RT Preempt Linux.

You can download the code in this link.

https://github.com/queristq/rt_periodic_thread/archive/master.zip or you can git clone by git clone https://github.com/queristq/rt_periodic_thread.git

To build the code,

  • mkdir build
  • cd build
  • cmake ..
  • make

RT Performance between SCHED_RT and SCHED_IDLE

In the code, I have created two threads, and tested the RT performance for two different thread schedule policy between SCHED_RT and SCHED_IDLE. The figure below shows the result. The blue line shows the log10-scaled histogram of the loop time, and the orange line shows the log10-scaled histogram of the loop time. As shown in the plot, SCHED_RT made low jitters in the periodic loops. The test environment was not strictly controlled (I did internet browsing… while the loop was running).

1

RT Performance over Different Thread Priorities

I have conducted similar tests with different thread priority. I have selected the same thread policy SCHED_FIFO, and the priority of two threads were chosen to 1 and 99 respectively. The jitters of the each loop is shown in the figure below. As shown in the figure, interestingly the difference was very minor. Once you see the details, you can see the result of Priority 1 is slightly better.

2

If you want a full result, you can see the test result in the attached excel sheet.

Example code

#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <pthread.h>

#define TIMESPEC_ADD(A,B) /* A += B */ \
    do {                                   \
    (A).tv_sec += (B).tv_sec;          \
    (A).tv_nsec += (B).tv_nsec;        \
    if ( (A).tv_nsec >= 1000000000 ) { \
    (A).tv_sec++;                  \
    (A).tv_nsec -= 1000000000;     \
    }                                  \
    } while (0)

#define TIMESPEC_SUB(A,B) /* A -= B */ \
    do {                                   \
    (A).tv_sec -= (B).tv_sec;          \
    (A).tv_nsec -= (B).tv_nsec;        \
    if ( (A).tv_nsec < 0 ) {           \
    (A).tv_sec--;                  \
    (A).tv_nsec += 1000000000;     \
    }                                  \
    } while (0)


void *thread_func ( void *param )
{
    FILE *fp;
    char filename_fp[50];

    long thread_id = (long) param;

    sprintf (filename_fp, "%ld%s", thread_id, ".txt");
    fp = fopen(filename_fp, "w");//opening file

    struct timespec t_next, period, t_now, t_prev, t_diff;

    /* period = 1 ms * thread_id */
    period.tv_sec = 0;
    period.tv_nsec = ( 1 ) * 500000; // a x ms

    clock_gettime ( CLOCK_MONOTONIC, &t_now );
    t_next = t_now;
    t_prev = t_now;

    int t_jitter[100];
    for (int i=0;i<100;i++) t_jitter[i] = 0;
    int t_j = 0;

    for ( int i = 0; i < 100000; i++ )
    {
        clock_gettime ( CLOCK_MONOTONIC, &t_now );
        t_diff = t_now;
        TIMESPEC_SUB ( t_diff, t_prev );
        t_prev = t_now;
        t_j = t_diff.tv_nsec / 10000;
        if (t_j<0) t_jitter[0]++;
        else if (t_j>99) t_jitter[99]++;
        else t_jitter[t_j]++;
        if(i%10000==1) printf("%d\n",i);
        TIMESPEC_ADD ( t_next, period );
        clock_nanosleep ( CLOCK_MONOTONIC, TIMER_ABSTIME, &t_next, NULL );
    }

    for (int i=0;i<100;i++) {
        printf("%d ",t_jitter[i]);
        fprintf(fp, "%d\n",t_jitter[i]);
    }
    fclose(fp);
    return NULL;
}

int main ()
{
    int policy;
    struct sched_param prio;
    pthread_attr_t attr;

    pthread_t tid1;
    pthread_t tid2;

    policy = SCHED_OTHER;
    if (pthread_setschedparam( pthread_self(),policy, &prio )){
        perror ("Error: pthread_setschedparam (root permission?)");
        exit(1);
    }

    pthread_attr_init( &attr);
    pthread_attr_setinheritsched( &attr, PTHREAD_EXPLICIT_SCHED);
    policy = SCHED_FIFO;
    pthread_attr_setschedpolicy( &attr, policy);
    prio.sched_priority = 99; // priority range should be btw -20 to +19
    pthread_attr_setschedparam(&attr,&prio);

    if ( pthread_create(&tid1, &attr, thread_func, (void *)(1)) ){
        perror ( "Error: pthread1_create" );
        return 1;
    }

    pthread_attr_init( &attr);
    pthread_attr_setinheritsched( &attr, PTHREAD_EXPLICIT_SCHED);
    policy = SCHED_FIFO;
    pthread_attr_setschedpolicy( &attr, policy);
    prio.sched_priority = 1; // priority range should be btw -20 to +19
    pthread_attr_setschedparam(&attr,&prio);

    if ( pthread_create(&tid2, &attr, thread_func, (void *)(2)) ){
        perror ( "Error: pthread2_create" );
        return 1;
    }

    /* wait for threads to finish */
    pthread_join ( tid1, NULL );
    pthread_join ( tid2, NULL );

    return 0;
}

If you are interested in how to make an RT Linux, please see another post of mine.

I found a very good material to study deeper on RT thread.

  • https://csperkins.org/teaching/2004-2005/rtes5/lecture10.pdf
  • http://retis.sssup.it/~lipari/courses/str09/10.rtprogramming-handout.pdf

If you have any questions on this code or this post, please leave a reply. Then, good luck!

[1] Nanosleep, http://man7.org/linux/man-pages/man2/nanosleep.2.html

[2] Timespec basic operation, http://www.zemris.fer.hr/~leonardo/srsv/skripta/src/periodic-tasks-2.c